Hayawin Product Page
1. Closed sheet metal and aluminum alloy design structure to ensure the highest level of safety protection
2. Standard anti-static frame upper plate and stacked plate two functional mode selection, while meet the operation of double panel and light plate.
3. The front and rear push knife device can adjust the gap of the push knife according to the thickness of the PCB board.
4. The top is open for easy stacking of the pcb board.
5. Easy to use touch screen function control interface.
6. Width adjustment device for stable balance (hand control wire rod adjustment).
7. Microcomputer Siemens PLC control system, with stable and reliable work.
8. Touch screen display operation, with the function of automatic fault diagnosis, convenient man-machine dialogue.
9. Multiple sound and light and touch screen prompt alarm function.
10. The delivery plate can set the lifting step distance of the material rack according to the PCB thickness.
11. Three-point positioning type up and down pneumatic clamping, to ensure the accurate position of the feed box.
12. The push board protection system ensures that the PCB board will not be broken and reduces the process loss.
13. Humanized design to ensure that the PCB board is not broken, improve the output capacity.
14. Smaller machine footprint.
15. Compatible SMEMA interface.
Technical Parameters:
Description
This device is used for the upper plate operation of the production line light board and double-sided circuit board.
Maximum board capacity
300 pieces (0.6 mm thick circuit board)
Cycle Time
About 8 seconds
Power supply
220-230V communication (user specified), single phase
Electrical load
180 volts maximum
Gas pressure
4-6 bar
Air flow volume
Up to 30 liters / minute
Transfer height
900±20mm (or user specified)
Transfer direction
Left &#; right or right &#; left (optional)
Applicable frame size
355*320*563mm
PCB Size
350*(50-250)mm
PCB Thickness
0.6-3mm
Dimension
*750*mm
Weight
300KG
Startup Power
300W
Lifting Step
10, 20, 30, 40, 50 Step size can be set arbitrarily
Compressed Air Source
5-6KG
Fixed Edge
Front fixed (optional after fixing)
Transfer Direction
Left to right (optional right to left)
Destacker Machine Part
PCB Size
For more Good Price and Quality Bare Boards Destacker for Pcbinformation, please contact us. We will provide professional answers.
Explore more:The Development History of Plastic Pyrolysis Technology
350*(50-250)mm
PCB Thickness
0.8-3mm
Circling Time
10s
Transfer Motor
Xinyu 42 * 48 stepper motor
Feed Belt
6.5mm wide ESD belt
Brapboard cylinder
Airtac thin cylinder
Push-type broach
Imported Hexin Steel 0.5mm thick push knife
Driver
Xinyu Step digital driver
Inductor
High-precision slow-reflection, HUAYIFENG
Tricoloured light
LED three-color light (green represents normal operation, yellow represents standby state, red light represents fault alarm or no material waiting for alarm
Maintenance and repair
(1) High temperature
The machine is easy to malfunction in the high temperature environmentthus affects the production. Manufacturers do not know the cause of thecase that is mechanical damage, only normal use, attention tomaintenance and micro-repair, these mechanical failure control.
(2) Voltage problem
After-sales service manufacturers often encounter customer response tomechanical failure, such as mechanical heating can not work, unable torotate control display instability. The causes of the above failures, inaddition to a few poor quality, most of the voltage is not enough, capacityis not enough, line aging and lead to imbalance between circuits. If it isnot repaired in time, the machine will burn out.
(3) Professional maintenance
Equipment professional electrical maintenance personnel, regularmaintenance and repair of machinery. Can also be under the guidancof manufacturers to do a good job in the daily maintenance and regulamaintenance of machinery.
FAQ:
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by / skype/ /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by .
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
Comments
Please Join Us to post.
0