Things You Must Know While Buying Ceramic Coatings

Dec. 30, 2024

Things You Must Know While Buying Ceramic Coatings

The main drawback to ceramic coating is that it can be difficult to apply and requires special care in order to achieve a consistent finish.

Litong contains other products and information you need, so please check it out.

Ceramic coating is a process that coats a car&#;s surface with a solid ceramic material. The benefits of ceramic coating are that it protects the car from weathering, corrosion and oxidation. It also provides a glossy finish that is tough and resistant to scratches. Ceramic coatings are applied on vehicles to provide protection against corrosion, abrasion, UV rays, and other environmental factors.

Introducing the latest trend in car maintenance - ceramic coating. If you're a car enthusiast or a proud owner of a new vehicle, chances are you've heard of ceramic coatings and their supposed benefits. But before you rush to spend your hard-earned money on this treatment, there are a few things you need to know. In this article, we'll explore what ceramic coatings are, how they work, their pros and cons, and most importantly, whether they're worth the investment. So, buckle up and read on to learn everything you need to know before you make a decision.

Is ceramic coating good for your car?

Yes, ceramic coating for cars is extremely great protection for the paint surface. It not only increases the life of the paint but also provides an amazing glossy appearance to it as if the vehicle just rolled out of a factory.

Is a ceramic coating worth it?

Ceramic coating is worth every penny you invest. It provides superb protection against environmental harms and corrosion. It is a good practice to invest in ceramic coating services so that you can secure your vehicle paint integrity for a long time.

What is the best ceramic coating?

Detailing Devils provides the best in the form of ceramic car coating service. This is by far the best ceramic coating with 9H hardness protection against the worst of environmental harms. It is considered as the most advanced ceramic coating for the vehicle&#;s exterior paint surface. 9H DNA (Diamond Nano Armor) is a perfect with dual layered cross linking molecules of polymer. It provides ultimate gloss and protection to a vehicle. It is available in 3 Variants

Reload:
With 1 year warranty
Pro:
With 3 years warranty
Absolute:
5 years warranty

There is also a car coating called DNA Evolution that provides 7 years warranty on shine of the vehicle surface paint. And then there is DNA Voodoo, the self-healing coating that is recently introduced by Detailing Devils. This ceramic coating has the power to self-heal against hairline scratches and micro swirls.

Which is the best brand for Car ceramic coating in India?

There are many car ceramic coating brands available in the market today. It can be quite difficult to decide which one is the best for your needs. Here are a few factors to consider when choosing a car ceramic coating brand:

Price:
Some brands are more expensive than others, but you may get what you pay for. Make sure you understand exactly what services and warranty are included in the price.

Quality of work:
Look for a brand with a good reputation and track record. If possible, visit their facilities to see how the coating is applied and checked for quality.

Guarantees and warranties:
Many brands offer guarantees on the quality of their work as well as warranties on coatings and workmanship. This can give you peace of mind if there are any problems down the line.

Looking for the best ceramic coating brand? Look no further than Detailing Devils! Our professional grade coating is the perfect solution for all your detailing needs.

Is ceramic coating better than wax?

Wait, what? The wax and sealants do not even come close to ceramic coating. There is no hiding the fact that waxes are an effective product since old. Many have been using to provide a spectacular shine to their vehicle. But the life of wax is much shorter when compared to the ceramic coating. This may lead to buying the wax again and again to fix a new shine on your vehicle. A total waste of time and money. However, the ceramic coating can stay for as long as 1 to 5 years depending on the coating and its application.

How to apply ceramic coating?

Applying a ceramic coating to your car requires careful preparation and attention to detail. Follow these steps for a successful DIY application:

Materials and Tools:

Ceramic coating product
Applicator pad or microfiber cloth
Isopropyl alcohol (70% concentration or higher)
Microfiber towels
Clay bar (for surface decontamination)
Wash mitt and pH-neutral car shampoo
Gloves and protective eyewear

Step-by-Step Guide:

1. Wash and Decontaminate:
1. Wash your car thoroughly using a pH-neutral car shampoo and a clean wash mitt.
2. Use a clay bar to remove any contaminants like tar, tree sap, or industrial fallout. This step ensures a clean surface for coating application.
2. Dry the Car:
1. Use microfiber towels to dry the car completely. Ensure that no water spots remain.
3. Surface Inspection:
1. Carefully inspect the paint for any remaining imperfections. Ceramic coatings lock in the current paint condition, so any scratches or swirls should be addressed before applying the coating.
4. Isopropyl Alcohol Wipe Down:
1. Moisten a microfiber cloth with isopropyl alcohol and gently wipe down the entire painted surface. This removes any remaining residues and prepares the surface for coating adhesion.
5. Application:
1. Work in a shaded area or garage to avoid direct sunlight during the application.
2. Shake the ceramic coating product well before using.
3. Apply a few drops of the coating onto the applicator pad. It's better to apply a thin layer and do multiple passes if needed.
4. Work on a small section at a time (e.g., one panel) and apply the coating using even, overlapping motions. Avoid excessive application as it can lead to streaks or uneven spots.
6. Buffing:
1. After applying the coating to a section, wait for a short period (check the product instructions) until the coating starts to haze or flash.
2. Use a clean microfiber towel to gently buff off the haze. Make sure to use a clean side of the towel for each pass.
7. Repeat for Each Section:
1. Continue applying and buffing the coating section by section until the entire car is coated.
8. Curing Time:
1. Most coatings require a curing time after application. This can range from a few hours to a day, depending on the product. Make sure to follow the specific instructions provided by the manufacturer.
9. Avoid Water and Contaminants:
1. Avoid washing the car or exposing it to water for the recommended curing period. Also, avoid exposure to contaminants that could mar the coating's surface..
10. Regular Maintenance:
1. While ceramic coatings offer enhanced protection, regular maintenance is still essential to preserve the coating's effectiveness and appearance. Use pH-neutral car wash products and microfiber towels for washing.

Remember that the application process may vary slightly depending on the specific ceramic coating product you're using, so always refer to the manufacturer's instructions for the best results. If you're unsure about the application process, consider seeking professional assistance to ensure the coating is applied correctly.

Ceramic coating has many advantages but some of them are worth mentioning through which the ceramic coating is popularized among the large crowds. It provides protection against:

Direct harsh sunlight
Off season acidic rains
Bird dropping
Swirl Marks & Water Spots
Minor blemishes and scratches
Harmful pollutants
Road chips
Road Grime and Contaminants

Not only this, but it also keeps your car shiny for years. Will you still ask the question &#;what is ceramic coating for cars?&#; One must get their vehicle coated with the ceramic coating to obtain maximum shine and protection on the vehicle paint surface or the vehicle exterior body.

What does a ceramic coating does not do?

Ceramic coating can do a lot of wonders on your car but it won&#;t buy you a poolside house, a May Bach, and a lady waiting for you with grapes in hand. Just kidding.

Ceramic coatings may have a lot of advantages over everything. But there are some things it falls short on. They are:

Requires Professional Administration not DIY
It can be Costly
It cannot fix heavy damage and scratches

Apart from that ceramic coating for car doesn&#;t have any other drawbacks. Your bike or car can be as shiny, new, and beautiful as possible with the application of the ceramic coating.

Who makes the best ceramic car coating?

that makes your vehicle become a shine and protection beast. It brings out a flawless finish to any vehicle paint, glass, rubber, fabric, leather and plastic parts. Each service is crafted to target individual parts of a vehicle for maximum care. Its detailing services comprises of.

Restores the shine of a vehicle by buffing the vehicle paint and removing contaminants from it.
Restores the wheel by removing break-dust, mud, and pollutants from it. Adds shine and darkness to it.
Restores headlight by removing haze from foggy glasses and rendering them clean and shiny.
Restores chrome fittings of a vehicle by cleaning and polishing them to an absolute finish.
Restores fabric parts of a car interior by removing stains and marks from it.
Restores leather parts of a vehicle by removing oil stains, imprints, cracks, etc.
Restores dashboard, trim, steering wheel and all the parts of a vehicle interior by a thorough cleaning.

Coatings

involves applying a specialized ceramic coating to different parts of a vehicle. Keeping in mind the different surfaces a vehicle has, each ceramic coating is designed to be applied on a specific surface only. This provides the ultimate protection a vehicle can get. The services with ceramic nano coating are mentioned below:

9H DNA is the popular nano ceramic coating offered by Detailing Devils in the form of service. It is the nano tech coating with properties like scratch resistance, mud-repellence, hydrophobicity, chemical-resistance (acid/alkaline), that help the surface it is applied on to stay unaffected against the harmful effects of UV rays, road debris, harsh weather, rains, etc. It has 3 variants depending upon the density of ceramic particles contained in each of them: ABSOLUTE: 5 year warranty, PRO: 3 year warranty, RELOAD: 1 year warranty. The best 9H nano coating for cars.
A water-repellent coating applied to a car&#;s wind-shields. It has a unique good water contact angle that helps windshields repel water in the form of beads and provides better vision while driving in rains. Also, it has an anti-glare feature that promotes better night vision.
Developed using three ceramics mixed together, it serves all types of wheels, especially alloys, to help them withstand heat created by the braking system of vehicles. It also renders them mud-repellent and hydrophobic.
Permanent tire shine nano coating to protect the black shine of tires and prevent them from cracking and yellowing.
A water-based nano coating for dash trim and other parts to protect their shine from fading & getting spoiled for years.
An industrial nano coating for fabric surfaces to prevent them from stains, anti-fouling, fading and make them more breathable.
Nano coating for leather surfaces to protect them from water and oil based stains while preventing them from cracking and dullness.

Teflon vs Ceramic Coating for Cars: Which Is Better?

Teflon is a coating that is applied around a surface to protect it against many damages. Ceramic coating, on the other hand, bonds with the vehicle paint itself. The Teflon has less thickness when compared to ceramic coating. It has 0.02 microns while the ceramic coating has a thickness of 2 microns. Ceramic coating car also has increased durability and hardness on Mohs scale if compared to Teflon. So, it goes without saying that ceramic coating is clearly the obvious choice.

As mentioned before, nano coating for car can be costly but it is a one-time application process that provides 1-5 years of durability if applied in a correct manner. In India, the cost for a good may cost somewhere around 20-70K for cars. Depending on the years of warranty it will provide. For bikes the cost would be considerably lesser, almost half the amount compared to cars.

Ceramic coating myths

There are certain myths about ceramic coating car and bike that makes the customer attract or repelled from getting it. Some of them are listed here.

Your car will be completely scratch proof (only self-healing coatings can do that)
It is for lazy people who don&#;t want to maintain their vehicle (Little maintenance required)
Stone chips won&#;t do anything to your paint surface (they would)
It can be applied directly (No, it also requires a skin restoration detailing beforehand)
It is DIY once you get the hang of it (No, professional tools, place, techniques, temperature required)
Does not need regular wash ( It does, with a ceramic shampoo)

These are some myths people encounter about ceramic coatings.

More Info

How Much Does An Industrial-Sized Powder Coating System Cost?

Investing in powder coating equipment can dramatically increase the success of a busy job shop or parts manufacturing business. Whether bringing powder coating in-house to save money or improve quality, upgrading from an older coating system, or converting from wet paint to powder coating, there are huge benefits to setting up a new industrial powder coating operation. One of the most common questions the experts at Reliant Finishing Systems get asked is how much will a powder coating system cost?

Generally, the greater the size and automation level, the higher the system price. It isn&#;t unusual for an automated Coating Line with powered conveyor to cost 3-10 times as much as a batch system that can provide similar throughput. In , a coating system for use in a production environment will likely cost over $200,000.00 but less than $2,000,000.00 installed, plus the cost of getting your building ready and connecting utilities. This assumes you&#;re buying new equipment from an established brand name provider, not unreliable used equipment from a reseller or light-duty equipment from an unknown manufacturer or a hobbyist/home coater website. When dealing with fully automated powder coating lines for very large parts, parts that require outgassing, parts that require multiple coats, or where throughput requirements are quite high, the price can reach $10,000,000.00 or more.

That&#;s a wide price range, and it can quickly be narrowed down based on your answers to a few questions. These answers will also help determine what type of system will produce the best results for your application. Industrial finishing systems are typically broken into three categories: batch, constant process, and hybrid.

With batch powder coating systems, parts are prepped, coated, and cured in batches. Most batch systems rely on rolling racks filled with parts and manually transported between appliances. Some batch systems utilize a floor-level towline or overhead conveyor to assist with parts movement. Almost all batch systems involve manual operations. Human operators do parts preparation, powder coating application, and parts handling.

With constant process lines, automation is more common. Chemical pretreatment is often done with a multi-stage washer instead of washing parts by hand using spray wands. Powder coating is often applied using automated guns instead of painters. Parts are transferred via powered conveyor instead of rolling carts.

With hybrid systems, parts preparation may be performed offline and then prepped parts are finished using an automated process. In other hybrid systems, parts are moved from one appliance to the next using an indexed conveyor system. The parts dwell in the various appliances for a fixed period of time before being moved in unison.

This article includes some of the questions we ask when providing an estimated budget to potential buyers, as well as information that can help you assess what type of powder coating system would work best for you.

What&#;s the largest part you want to coat?

The first thing a powder coating equipment provider must determine while pricing your coating system is the size of the parts you&#;ll be coating. They will need to know the size of the largest part you will be powder coating with your new system and use that to establish the base size for your equipment. If you typically coat a large number of parts that are significantly smaller than your largest parts, you may want to consider outsourcing the coating for the large parts. If an automated system seems appropriate, using a stand-alone batch system for your large parts may be less expensive than upsizing your conveyorized line to accommodate them.

For batch coating large or small parts, you&#;ll need to figure out how many parts you can coat at one time and how large the racks (also known as rolling racks or parts carts) will need to be to reach your throughput requirements. In some cases, it may be better to use multiple smaller, easy-to-move racks instead of one or two large, cumbersome ones. With very large parts, seeing only one part per rack is common.

Once you have the measurements for your parts and the rack system you intend to use, you&#;ll need equipment that is large enough to accommodate your throughput needs and allow equipment operators adequate room to prepare and coat the parts. With automated and/or constant process systems, the appliances are typically smaller in terms of height and width, but the ovens and pretreatment system are often longer to allow for adequate dwell times as parts travel through them.

How many parts do you need to be able to coat in a typical workday?

Just as important as part size, you need to have an accurate estimate of your throughput requirements. Knowing these two things will help you determine whether a batch coating system, constant process powder coating system, or hybrid coating system will best fit your operation.

Contact us to discuss your requirements of coating production line. Our experienced sales team can help you identify the options that best suit your needs.

Unless you have multiple appliances to increase productivity, with a batch system the slowest step of the powder coating process limits your throughput. Typically, this will be curing your parts after they have been coated.

After the surface of the part has reached curing temperature, the typical curing time for standard polyester powders is around 10 minutes. This is based on a curing temperature of about 400°F. Sheet metal parts of 16 gauge or thinner material will usually take around 10 minutes to reach curing temperature. This leads to a total curing process time of 20 minutes or a bit more. Heavier parts, such as a frame made from ¼&#; angle iron or tube stock may take about 30-40 minutes to cure. Curing heavier steel parts and castings can take 45-60 minutes or longer. Different powders will have different curing requirements, but these time estimates make a good guideline when calculating throughput.

If you need greater throughput, you can either add more ovens or increase the size of the oven. If the labor costs associated with operating multiple ovens or handling giant racks of parts exceeds your operating budget, an automated coating solution might be better.

Most manufacturers immediately prefer a conveyorized system with some level of automation, but purchasing batch equipment is almost always significantly less costly. The number one reason to select an automated coating system over a batch operation is to process more parts per hour. If your business needs to produce a large number of powder coated parts on a daily or weekly basis, and these parts are somewhat similar in size, the best solution is probably a conveyorized line with automated equipment. With this type of system, coating is usually a continual process, so you&#;ll almost always be able to coat more parts in a set period of time than if you coated them manually in batches.

Batch powder coating systems, however, provide greater flexibility regarding parts sizing, complexity, and construction materials. Another benefit over constant process lines is that an issue in one area&#;such as discovering a problem with the powder being applied&#;won&#;t prevent other phases of the coating process from taking place, since the parts aren&#;t being moved along a fixed path by a conveyor.

How much room do you have to dedicate to your new coating line?

As a general rule, automated systems will require significantly more floor space than other solutions. You will need accurate dimensions of the equipment you are considering to plan an effective shop layout with good workflow. Make sure you have enough room in your shop for not only the equipment, but adequate space for your conveyor or the travel path of your racks. With a batch coating operation, you will also need staging areas for parts moving into and out of your pretreatment, coating, and curing areas. With automated or hybrid systems, you will need enough conveyor to allow for loading, cool-down, and unloading areas.

Walkways, forklift lanes, emergency egress routes, and storage areas for unused racks are other factors to consider when planning your shop layout. You also need to make certain you have enough space to satisfy your local code requirements. Certain codes specify how much room you must have between appliances or between appliances and the building walls and roof. Codes vary by location, so it&#;s wise to establish a good relationship with local code inspectors before purchasing a new finishing system.

Another consideration when determining how much room you will need is the cost of having utilities routed to your equipment. Larger systems will usually require longer, more expensive utility runs to reach the various appliances. You also need to allow for code-required valves and disconnects for utilities such as gas and electrical power, as well as the cost to provide compressed air for your blasting equipment (if required), powder guns, and the powder spray booth&#;s pulsed air self-cleaning features. Water must be supplied to the area where you plan to perform chemical pretreatment and cleaning processes. Drains or water/chemistry capture alternatives are also important, and these can significantly impact your overall budget.

What are the quality requirements for the powder coated finish on your parts?

There are numerous finishing specifications that you may be required to meet in order to capture and retain a client&#;s business or meet your company&#;s own product standards. Some of these finish standards require a specific pretreatment process to achieve acceptable results. Others may require finished parts to pass a durability test. Depending on your industry or your end-customers&#; uses, your powder coated parts may need to meet national specifications before they can be used in the field.

Three commonly encountered quality standards for coating aluminum are AAMA (American Architectural Manufacturers Association) , , and (http://www.aamanet.org/upload/file/--_Comparisons_4-6-11.pdf). Each standard requires more extensive pretreatment and stricter powder quality processes than the last. A manual operation can pass the specification, but the , and definitely the , require an automated pretreatment process (usually of 4-5 stages or more). Dip tanks can work for specialty parts, but manual solutions are not practical if you have a high throughput rate. Using a conveyorized line with a multi-stage pretreatment system is the most efficient way to consistently prepare large quantities of parts.

If you need stringent quality control, an automated coating line provides repeatable and consistent finish quality that would be challenging to match with a manual coating operation. Automatic gun systems from companies like Wagner, Nordson, and Gema can be programmed to apply specific amounts of powder at just the right setting for best coverage. The process can be fine-tuned for each unique part and then easily repeated automatically. If the booth and guns are properly maintained, the results are consistently ideal.

Knowing the details of your finish quality requirements makes specifying your coating system much simpler. As with size and throughput, the more demanding your finish requirements are, the more expensive your powder coating system is likely to be.

What are your goals in terms of long-term labor costs?

Labor cost management is a critical component of efficient production. Reducing the labor costs associated with manufacturing can propel a company forward. Automated finishing lines can almost always reduce the amount of labor required when compared to their manual counterparts, whether batch, constant process, or hybrid in nature. In any case, a minimum number of employees is required to operate and maintain a finishing system, no matter how heavily automated it is.

With a small to midsize automated line, you will need someone to load the parts, another person to set up and keep an eye on the pretreatment system and spray booth, and perform manual touch-up of problem areas, a third person to inspect/unload the parts, and a finish line manager to keep chemical and powder orders up to date, assure the employees are doing a quality job, and make certain the equipment is running properly and being well maintained. At least one person needs to know how to adjust the pretreatment equipment, titrate the chemistry, load powders, and maintain the conveyor and finishing equipment so the line operates efficiently. Even if personnel perform multiple roles, a minimum of 3-5 employees is typically required for a basic automatic line.

You will likely need a few more workers to obtain a similar amount of throughput using batch equipment. You will need someone to load the parts, possibly a second person and third person to move loaded racks from station to station, another person or two to perform pretreatment, one or two people to coat parts, at least one person to load the oven and inspect/unload the parts, and a finish line manager. Even if personnel perform multiple roles, a minimum of 6-9 employees is usually required for a production powder coating operation that uses batch equipment.

Need Coating Advice or Help Sizing A New Powder Coating Line? We&#;re Here for You!

In addition to designing new coating systems, and manufacturing, installing, and supporting our own powder coating and industrial painting equipment, Reliant Finishing Systems also provides a wide range of services to help you update your existing finishing system or make changes so your coating operation runs smoothly. We offer line audits, on-site troubleshooting, consulting, equipment refurbishment, and more. Call us today at (256) 355- if we can be of help.

Line-X: An indestructible coating that you can apply to anything!

Luv_Jaiswal

BHPian

Join Date: Sep

Location: Mumbai

Posts: 69

Thanked: 99 Times

View My Garage

re: Line-X: An indestructible coating that you can apply to anything!

Quote:

shravan2k2

Originally Posted by

Came to know of this video recently regarding an indestructible coating spray for vehicles.

LineX is really an amazing product. Coincidence or what, I do not know, but I was just doing some research on this a few days back.

There are videos all over the Internet that show things like eggs, fruits, and things alike, all coated in LineX. It literally toughens them enough to take on some serious beating.
And also needless to say, some guys in the USA have coated their entire car in LineX
It has a very rough finish to it, which means it really is something that one 'may' apply it to their off-roading vehicles. This thing makes the car part really strong and makes the most sense in those cases.

Well, who knows? Maybe if this thread catches enough steam and is read by the folks who would love to do something like this, we may get to see an example!

Cheers,
Luv.

LineX is really an amazing product. Coincidence or what, I do not know, but I was just doing some research on this a few days back.There are videos all over the Internet that show things like eggs, fruits, and things alike, all coated in LineX. It literally toughens them enough to take on some serious beating.And also needless to say, some guys in the USA have coated their entire car in LineXIt has a very rough finish to it, which means it really is something that one 'may' apply it to their off-roading vehicles. This thing makes the car part really strong and makes the most sense in those cases.Well, who knows? Maybe if this thread catches enough steam and is read by the folks who would love to do something like this, we may get to see an example!Cheers,Luv.

Hey there.LineX is really an amazing product. Coincidence or what, I do not know, but I was just doing some research on this a few days back.There are videos all over the Internet that show things like eggs, fruits, and things alike, all coated in LineX. It literally toughens them enough to take on some serious beating.And also needless to say, some guys in the USA have coated their entire car in LineXIt has a very rough finish to it, which means it really is something that one 'may' apply it to their off-roading vehicles. This thing makes the car part really strong and makes the most sense in those cases.Well, who knows? Maybe if this thread catches enough steam and is read by the folks who would love to do something like this, we may get to see an example!Cheers,Luv.

If you would like more information about this product, please feel free to contact us. Recommend other popular products for you: professional Double-coating Line, Double-coating Line Price, 1 Side 1 Coating Line for coating factory, professional 1 Side 1 Coating Line, 1 Side 1 Coating Line Supplier, 1 Side 1 Coating line for sale, 1 side 1 coating line for thin coil, professional double-coating line, professional 1 side 1 coating line, 1 side 1 coating line factory, 1 side 1 coating line supplier, double-coating line price, single-coating aluminium coating line price

5 Facts About Ceramic Coatings You Must Know!

Paint Protection on the Sunshine Coast is an absolute necessity! The Coast is beautiful and has so much to offer however being located on the coastline, makes your vehicle more vulnerable to water spotting, contamination, and rust. Here are 5 facts you must know before getting dealership paint protection or any professional ceramic coating for your vehicle.

1: Scratches & Stone Chips

In short and simple terms &#; a ceramic coating will not prevent scratches and stone chips from harming your paintwork. This can be a selling point people can use when trying to convince you to get paint protection, but it is far from the truth. A ceramic coating is super thin and the last thing it will do is prevent stones from chipping your paint. When it comes to scratches, people can be misled by seeing phrases used like &#;10H Hardness&#;, &#;Diamond Hardness&#; or even &#;Scratch Resistant Coating&#; which can give you a false sense of reality of knowing how well the ceramic coating will protect your vehicle. A professional ceramic coating will help reduce light marring and scratches induced when washing, drying, or &#;dry wiping&#; your paint but don&#;t expect it to provide protection against tree branches, children&#;s toys, and handbags.

2: Ceramic Coatings & Lifetime Warranties

It&#;s only normal to associate the warranty duration with the potential quality of a product so understandable to think that if the paint protection comes with a &#;lifetime&#; or 20-year warranty &#; it must be good! Therefore, if another ceramic coating has a 5-year warranty, it must not be as high quality as the alternative. This is far from the truth &#; do not assume the quality of a ceramic coating or paint protection by the length of the warranty or guarantee it possesses. Over the years we have seen ceramic coatings with lifetime warranties rapidly degrade on the paintwork or even disappear from the planet altogether. It&#;s even worse when the warranty terms were not read through and you realize that the &#;you beaut&#; warranty you thought you had has more holes in it than Swiss cheese &#; and covers nothing.

It&#;s so important to first read the warranty terms and secondly understand that it&#;s the preparation of carrying out the service and the ongoing maintenance that really matters. If a vehicle is not prepared adequately and if it&#;s not maintained as directed, most likely the ceramic coating will not perform as described. Also, if you don&#;t maintain the coating as directed by the installer, your warranty could be voided due to the lack of care. Do you research online, find videos by multiple installers around the world, and read through reviews so you can understand how superior is that ceramic coating.

3: Ceramic Coatings Don&#;t Need Maintenance

You only need to rinse down your vehicle with water if it has a ceramic coating, right? Wrong! A ceramic coating still needs to be washed with (pH neutral) car wash and dried down with a drying towel and we recommend this to be done every 2 &#; 3 weeks. If you do not maintain your ceramic coating, it could lead to the paint being contaminated which may cause the water to stop beading. If a ceramic coating stops beading water like it first did when originally installed, this can be misinterpreted as a &#;faulty install&#; however it usually comes down to lack of maintenance. The paint protection is there to preserve the factory paint as a sacrificial layer so that if required, it can be polished away whilst leaving the paintwork in near-perfect condition. If you leave a bird dropping on the ceramic coating long enough, there is a high possibility that it will eat through the coating and into the paint. The dropping must be washed away sooner rather than later to avoid this from occurring.

4: Ceramic Coatings Don&#;t Prevent Water Spotting

Ceramic Coatings have been portrayed as having the ability to prevent your vehicle from getting water spotting and it can be assumed that this is covered under the coating warranty. However, this is nearly never the case and people can be left bitterly disappointed unless they are properly informed prior to having it installed. A ceramic coating will preserve the paintwork as much as possible but if dirt has been allowed to dry on the surface, a build-up of dirt-filled drops will dry up, forming &#;water spots&#;. A ceramic coating is normally very hydrophobic which means water should bead off in little droplets, so if they&#;re allowed to dry up whilst being filled with dirt and other sediments, you&#;ll most likely have water spots. The myth that a ceramic coating will stop this is far from the truth as it can be the culprit of causing it to happen if you are not washing your vehicle regularly enough.

5: All Ceramic Coatings Are NOT The Same

When you want to get your vehicle protected with a ceramic coating, it&#;s wise to ring around and get quotes to compare what is best for you. It&#;s important to make sure you&#;re comparing apples with apples as ceramic coatings can easily be mistaken to be the same, especially when everyone says that theirs is the best! As an example, you could buy a very well-known branded 70-inch TV for $8,000 or choose another branded TV of the same size for $1,500. They share the same specifications and possibly even warranty terms however there will be hidden hardware and details that are of far better quality in the more expensive TV that you will only be made aware of if you do your research. After you research the ceramic coating online and check out reviews and videos, it&#;s worth every penny to do the same with the detailing business or dealership that is using this paint protection.

As important as it is to have your vehicle protected so that it stays easy to maintain and looks its best, it&#;s nearly even more important to do your research prior to getting dealership paint protection or any ceramic coating for that matter. When you are properly informed of what the ceramic coating will and will not do for your vehicle, then you can make a confident decision about what you want for your car. There&#;s a lot of fancy language and lingo used, combined with eye-catching marketing videos but at the end of the day, doing some old-fashioned research online and visiting the business in person to see it happen is the best way to ensure you&#;re taking your vehicle to the right place.

If you are looking for more details, kindly visit types of coil coating.

Comments

All Comments (0)

Previous: None
Next: What equipment is used for powder coating?

Things You Must Know While Buying Ceramic Coatings