Using Silicone Molds to Make EPS Patterns For Lost Foam

1, All process including filling, expanding, sieving, delumping and conveying to silos are done automatically.
2, With primary and secondary expansion device to get density of 8-30g/l
3, Fist filling is controlled by frequency converter
4, With power-off protection device
5, With Japan steam presure reducing valve TECHNICAL DATA          Item    PSY-70 PSY-90  PSY-120  Expansion Chamber  Diameter
Volume
Useable volume  Φ 700mm
0.6 m³
0.4m³   Φ 900mm
1.2 m³
0.8m³   Φ mm
2.2m³
1.5m³   Steam  Entry
Consumption
Pressure  DN20
80-100kg/cycle
0.6-0.8MPa  DN40
100-150kg/cycle
0.6-0.8MPa  DN40
150-200kg/cycle
0.6-0.8MPa  Compressed Air  Entry
Pressure  DN15
0.6-0.8MPa  DN20
0.6-0.8MPa  DN20
0.6-0.8MPa  Drainage  Condensate  Φ 20mm  Φ 20mm  Φ 20mm Throughout  15g/l
20g/l
25g/l
30g/l  100g/l
120g/l
150g/l
200g/l  150g/l
200g/l
250g/l
300g/l  250g/l
300g/l
410g/l
500g/l  Material Conveying Line      Φ 150mm  Φ 150mm  Φ 150mm  Connected Load    8.93Kw  9.73Kw  13.33Kw  Density  First expansion
Second expansion  12-30g/l
  8-11g/l  12-30g/l
8-11g/l  14-30g/l
8-13g/l  Overall  Dimension  (L*W*H)  **(mm)  **(mm)  **(mm)  Weight    kg  kg  kg  Room Height Required    mm  mm  mm 

Main Features:1, All process including filling, expanding, sieving, delumping and conveying to silos are done automatically.2, With primary and secondary expansion device to get density of 8-30g/l3, Fist filling is controlled by frequency converter4, With power-off protection device5, With Japan steam presure reducing valve

If you are looking for more details, kindly visit 2l bottle blow molding machine.